LiftDesign Impro Lift Classic

Home » Lifts » Residential Lifts » LiftDesign Impro Lift Classic

The Impro Lift Classic is the ideal modernisation solutions for the most challenging shaft dimensions. Safety and reliability are still paramount in this bespoke answer to the most challenging project

  • Hydraulic Home Lift
  • Manual Hinged Door in powder coasted steel or glazed finish
  • Single, through or adjacent openings
  • Control cabinet from 600W x 280D x 1000H mm.
  • Speed from 0.15m/s to 0.3 m/s
  • Rated loads 250 – 315 – 385 kg for both passengers and wheelchair users
  • Indoor or outdoor structure, if no shaft available, in steel of glazed cladding
  • Minimum pit of 100mm
  • In the event of power failure, the lift will return to the lowest floor and release the door lock
  • Machine directive: 2006/42/CE
  • Australian code AS1735.18.

Specifications

  • Rated Load 250 - 385 kg
  • Max Speed 0.15 - 0.3 m/sec

    Metres per Second

  • Drive / Motor Type Hydraulic
Control System / Shaft Reading
This product features the Direct Approach floor system to offer an unbeatable ride

Shaft Specifications

  • Minimum Headroom 2450 mm
  • Pit Depth 100mm / 120 mm

    Metres per Second

  • Shaft Size 855 - 1355 mm x 860 - 1510 mm

    Width x Depth

Car / Cabin Specifications

Request a Quote on the LiftDesign Impro Lift Classic

Complete your details below and our sales staff will contact you soon to discuss a lift solution for you.

Design Considerations

Tell us a bit more about your lift requirements. Check as few or many options as you like.

Additional Information

Is there anything else you would like to tell us about your lift requirements ?