LiftDesign Impro Lift Plus

Home » Lifts » Residential Lifts » LiftDesign Impro Lift Plus
LiftDesign Impro Lift Classic

The Impro Lift Plus is a home lift that does not require major building work and, with just a 120 mm minimum pit and very low headroom, higher costs are reduced. All components are out of sight located in the shaft and this lift also features the auto-rescue system, returning the lift car to the closest landing upon power failure.

  • Hydraulic Home Lift
  • Automatic car and landing doors.
  • Motor controlled by a VVVF system to improve energy efficiency and floor stop accuracy
  • Single, through or adjacent openings
  • Control cabinet from 600W x 280D x 1000H mm.
  • Speed from 0.15m/s to 0.3 m/s
  • Rated loads 250 – 325 – 400 kg for both passengers and wheelchair users
  • Indoor or outdoor structure, if no shaft available, in steel of glazed cladding
  • Maximum travel 21 metres to 5 stops.
  • Minimum pit of 120mm
  • Machine directive: 2006/42/CE
  • Australian code AS1735.18.


  • Rated Load 250 - 400 kg
  • Max Speed 0.15 - 0.3 m/sec

    Metres per Second

  • Drive / Motor Type Hydraulic
Control System / Shaft Reading
This product features the Direct Approach floor system to offer an unbeatable ride

Shaft Specifications

  • Minimum Headroom 2400 - 2600 mm
  • Pit Depth 120 / 200 mm

    Metres per Second

  • Shaft Size 1100 - 1750 mm x 1100 - 1920 mm

    Width x Depth

Car / Cabin Specifications

Request a Quote on the LiftDesign Impro Lift Plus

Complete your details below and our sales staff will contact you soon to discuss a lift solution for you.

Design Considerations

Tell us a bit more about your lift requirements. Check as few or many options as you like.

Additional Information

Is there anything else you would like to tell us about your lift requirements ?